Status Bar - Siemens SINAMICS G220 Operating Instructions Manual

Operation and monitoring with SINAMICS SDI Standard
13.4 Icons
The table below shows examples of actions that have to be confirmed using the "ESC" key or
the "OK" key.
Table 13-3
The icons in the footer are shown with different background colors.
Table 13-4
13.4.3

Status bar

Description
The following table shows selected status bar icons.
Table 13-5
306
Examples of actions
Icons Description
Briefly press ESC key → focus change to navigation bar
• Briefly press ESC key → navigate back to next level up
• Press ESC for 2 s → focus change to displayed navigation bar (from level 2), fast
selection
Press "OK" key → confirm selection
Press "OK" key → edit selection
Press "OK" key → navigate to next level down
Footer background color
Color Description
Standard color
gray
Use in dialogs
blue
Fault present
Displayed in "Messages" dialog entry
Red
Status bar icons, converter is ready for operation
Icons Description
Motor running
Manual mode, continuous operation
Manual mode, jog mode
Manual mode via remote access
Commissioning
Procedure
• The converter has a fault.
• SINAMICS SDI Standard is activated, the
backlight is switched on.
• Display: "Messages" dialog entry
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter