Motor Control With On/Reverse Commands - Siemens SINAMICS G220 Operating Instructions Manual

Functions
14.11 Drive functions
14.11.1.2

Motor control with ON/reverse commands

Overview
The command "ON/OFF1" starts and stops the motor. The "Reverse" command reverses the
direction of rotation of the motor.
Description of function
Figure 14-167
Table 14-81
Parameters
The following list contains the parameters of the "Motor control with ON/reverse commands"
function.
Number
r0722.0...22
c0840[0...n]
c1113[0...n]
570
Two-wire control, ON/reverse
Function table
ON/OFF1 Reverse
0 0
0 1
1 0
1 1
Name
Digital inputs status
ON / OFF (OFF1)
Setpoint inversion
Function
The motor stops.
The converter brakes the motor to a standstill.
The motor starts.
The converter accelerates the motor in the "clockwise" direction.
The motor starts.
The converter accelerates the motor in the "counter-clockwise" di‐
rection.
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Unit
SINAMICS G220 converter