Table of Contents
Advertisement
Commissioning (Startdrive)
11.2 Basics
Example
In the following application, you create a user-defined list with the objective of accepting
parameter values for an additional drive.
1. You create a user-defined list with parameter values for a configured drive.
2. You open the list in another drive with the same hardware configuration.
3. You compare the parameter values of the drive with the saved values.
4. You apply the required parameter values for the drive.
More information
Detailed information about handling parameter lists and user-defined lists is provided in the
TIA Portal information system.
282
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter
Advertisement
Table of Contents
