Sinamics Sdi Standard, Converter In Degree Of Protection Ip55 - Siemens SINAMICS G220 Operating Instructions Manual

Operation and monitoring with SINAMICS SDI Standard
13.2 SINAMICS SDI Standard, converter in degree of protection IP55
13.2

SINAMICS SDI Standard, converter in degree of protection IP55

Precondition
Burns resulting from high surface temperatures
When the converter is operational, the surface of the SINAMICS SDI Standard operator panel
can reach temperatures exceeding 60 °C. Surface temperatures exceeding 60 °C can result in
light burns.
• If required, wear a glove when operating the SINAMICS SDI Standard.
Description
①
Figure 13-2
The SINAMICS SDI operator panel (Smart Drive Interface) Standard is located behind the front
door of the converter.
302
CAUTION
SINAMICS SDI Standard
SINAMICS SDI Standard
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter