Siemens SINAMICS G220 Operating Instructions Manual page 574

Functions
14.11 Drive functions
Figure 14-169
Table 14-83
ON/OFF1 clockwise rota‐
Parameters
The following list contains the parameters of the "Motor control with clockwise/
counterclockwise commands" function.
Number
r0722.0...22
c0840[0...n]
c1113[0...n]
c3330[0...n]
c3331[0...n]
r3333.0...3
p3334
572
Two-wire control, clockwise/counter-clockwise rotation 2
Function table
ON/OFF1 counter-clock‐
tion wise rotation
0
1
0
1
Name
Digital inputs status
ON / OFF (OFF1)
Setpoint inversion
2/3 wire control command 1
2/3 wire control command 2
2/3 wire control control word
2/3 wire control selection
Function
0 The motor stops.
The converter brakes the motor to a standstill.
0 The motor starts.
The converter accelerates the motor in the
"clockwise" direction.
1 The motor starts.
The converter accelerates the motor in the
"counter-clockwise" direction.
1 The motor stops.
The converter brakes the motor to a standstill.
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Unit
SINAMICS G220 converter