Table of Contents
Advertisement
Corrective maintenance
16.6 Full reset of all device settings
7. The user-defined settings are deleted.
8. Remove the memory card.
9. Switch off the converter supply voltage.
Result
All user-defined converter settings are deleted.
The converter firmware is unchanged.
After the manual reset to the factory setting, access to the web server is possible via the
service interface (X127) and via the PROFINET interface (X150). For access via the service
interface (X127), use the secure transmission protocol HTTPS.
If option module OM-IIoT is inserted, then the settings of interface X128 to the edge device
are deleted.
778
RDY
COM
Description
Factory settings are being restored
Factory settings have been restored
Restoring factory settings unsuccessful
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter
Advertisement
Table of Contents
