Table of Contents
Advertisement
The icons in the status bar are shown with different background colors. The colors indicate
the converter status.
Table 13-6
Color
13.4.4
Content area
Description
The following table shows selected content area icons.
Table 13-7
Icons
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Icons
Description
Commissioning via remote access
Unsaved changes
Service mode
Alarm
Standby
Motor will enter standby shortly
Status bar background color
Description
Converter is ready for operation.
Green
Converter is not ready for operation.
Cause: Missing control signals in the con‐
gray
verter sequential control are preventing the
motor from starting.
Converter is not ready for operation.
Cause: Fault present
Red
Content area icons
Description
Acknowledge all messages
Show historical faults and alarms in the "Messages" list
Hide historical faults and alarms in the "Messages" list
Scan code
Information
Go to
Clockwise direction of rotation
Counterclockwise direction of rotation
Operation and monitoring with SINAMICS SDI Standard
Motor is running or ready for operation.
The motor is not running or cannot be star‐
ted.
The motor is not running or cannot be star‐
ted.
Exception:
ESM is active and fault occurs.
In this case, the motor is running.
13.4 Icons
307
Advertisement
Table of Contents
