• Use case 1: A drive password has not been configured as function "Drive data encryption" has
not been activated.
1
– Press the "Restore" button.
– The converter takes the drive data from the backup file.
• Use case 2: A drive password is configured after the backup file has been created.
1
– Press the "Restore" button.
– Enter the drive password.
– The converter takes the drive data from the backup file.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
The settings at the time of the backup are restored.
The settings at the time of the backup are restored.
Function "Drive data encryption" is activated.
The drive password is still effective in the converter after data has been restored.
2
2
Commissioning (web server)
10.5 Functions and menus
3
3
257