• Scenario 1: A drive password is configured in the source converter. On the other hand,
function "Drive data encryption" had been previously de-activated in the target converter.
1
– Click on "Restore".
– Enter the drive password of the source converter.
• Scenario 2: The same drive password is configured in the source and target converters.
1
– Click on "Restore".
– Enter the drive password of the target converter.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
A dialog to enter the password opens.
The drive data are loaded into the converter from the backup file.
As a consequence, the status of the settings at the instant of the backup are restored.
Function "Drive data encryption" is activated. The drive password of the source converter
is transferred to the target converter.
A dialog to enter the password opens.
A dialog to enter the password opens.
2
2
Corrective maintenance
16.1 Replacing a converter
3
3
765