Restoring Drive Data From An Encrypted Backup File - Siemens SINAMICS G220 Operating Instructions Manual

Commissioning (web server)
10.5 Functions and menus
10.5.5.5

Restoring drive data from an encrypted backup file

Requirement
Requirements:
• An unencrypted backup file of the converter is available on the operating unit.
• Configured drive password:
– You know the originally configured drive password with which the drive data in the
– You know the currently configured drive password.
• You have the rights required for active user management (UMAC):
– "Create backup or load drive data to Startdrive"
– If Safety Integrated is contained in the backup file, the "Edit Safety Integrated application"
Procedure
To restore the drive data for the converter, proceed as follows:
1. Call the "Backup and restore" menu.
2. Navigate to the "Restore drive data from backup file" area.
3. Use the "Click to select file, or drag and drop file here" button to select the backup file.
4. The next steps depend on the use case:
258
backup file was encrypted.
Is only applicable if the currently configured drive password deviates from the originally
configured drive password, with which the drive data in the backup file was encrypted.
right is required.
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter