Table of Contents
Advertisement
Procedure
Retrieving component information
To go to the start page for the converter on the Siemens Industry Online Support portal,
proceed as follows:
1. In the navigation bar, navigate to the "Support" menu.
Confirm the selection using the "OK" key.
2. Select the "Component" menu item.
Confirm the selection using the "OK" key.
3. Select the required component.
Confirm the selection using the "OK" key.
Component-specific data is displayed, for example type, Article No., serial number.
4. Confirm the default "Scan" icon using the "OK" key.
The QR code with the previously output component information is displayed.
5. Scan the QR code with your mobile device.
You are forwarded to the start page for the converter on the Siemens Industry Online
Support portal.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Operation and monitoring with SINAMICS SDI Standard
13.5 Functions
319
Advertisement
Table of Contents
