Table of Contents
Advertisement
Installation
5.7 Option modules
3. Insert Option Module OM-DQ into the option slot of the converter.
Figure 5-26
4. Push Option Module OM-DQ up until it snaps in flush.
5. Tighten the fixing screw with a T20 torx screwdriver, applying a torque of 2 Nm.
6. Replace the housing cover and tighten the screws with a T20 torx screwdriver, applying a
torque of 2 Nm.
7. Press the cover caps onto the fixing screws.
Result
Option Module OM-DQ is connected to the converter.
124
Mounting Option Module OM-DQ in the option slot of the converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter
Advertisement
Table of Contents
