Table of Contents
Advertisement
Procedure
1. Call menu "Backup and restore" in the web server.
2. Navigate to the "Restore drive data from backup file" area.
3. Use the "Click to select file, or drag and drop file here" button to select the backup file.
4. To restore the drive data, proceed as described below depending on the specific application.
This step is included in the following diagrams as step 3.
• Scenario 1: No drive password is configured in the source and target converters.
1
– Click on "Restore".
• Scenario 2: No drive password is configured in the source converter. On the other hand, in
the target converter function "Drive data encryption" had been previously activated and a
drive password configured.
1
– Click on "Restore".
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
The drive data are loaded into the converter from the backup file.
As a consequence, the status of the settings at the instant of the backup are restored.
The drive data are loaded into the converter from the backup file.
As a consequence, the status of the settings at the instant of the backup are restored.
Function "Drive data encryption" is activated. The configured drive password is still
effective in the target converter after data has been restored.
2
2
Corrective maintenance
16.1 Replacing a converter
3
3
763
Advertisement
Table of Contents
