Table of Contents
Advertisement
5.7.9
Dimension drawing OM-IIoT
Dimension drawing
Figure 5-23
5.7.10
Mounting option module OM-DQ, converter in degree of protection IP20
Overview
Option module OM-DQ is mounted in the option slot of the converter.
Requirement
NOTICE
Damage to the option module by withdrawing and inserting under voltage (hot
swapping)
Withdrawing and inserting the option module when the power supply is switched on can
damage the option module or cause the option module to malfunction.
• Switch off the converter power supply before you withdraw or insert the option module.
Option module OM-DQ must be mounted as the lowermost module in the option slot of the
converter because this module does not have a connector for other option modules.
You will need a torx T20 screwdriver.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Dimensions of Option Module OM-IIoT
Installation
5.7 Option modules
121
Advertisement
Table of Contents
