Connecting
7.1 Line system, motor and braking resistor
1. Press the catch marked in the diagram to the right and slide the sheet-metal plate down again.
2. Tighten the two screws to a torque of 2 Nm.
7.1.4.3
Connection overview, converter in degree of protection IP55
Requirement
Only copper cables with an insulation that is designed for an ambient temperature of 75 °C are
permissible.
IP55 converter
Figure 7-8
160
Connection overview up to frame size FSC
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter