Table of Contents
Advertisement
The function view shows the following:
• Parameter list
Depending on the setting in the "System" menu > Settings, the parameter list shows either
all parameters or just the standard parameters.
• User-defined parameter list (optional)
– The user-defined parameter list contains selected parameters and is created using the "+
– "Setup_functions" parameter list
You can find more information in Chapter "User-defined parameter list (Page 250)".
The parameter list offers the following options:
• Toggling between two list views
– Show as "Simple view" and "Advanced view" with parameter numbers
• Searching parameters
– Search by parameter number or text search within parameter names
• Filtering the parameter list
– Parameter groups: Only show the parameters that are assigned to a particular function.
– Parameter types: display and/or adjustable parameters
• Changing parameter values directly in a parameter list
– Exception: blocked parameters
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Create list" tab.
The "Setup_functions" parameter list is intended for parameters that can only be
configured with the converter in commissioning mode. It is not currently possible to
access these parameters from the advanced setup menu. Suggestions are contained in
the factory setting.
Additional parameters can be added to the parameter list. This allows uniform access to
the parameters of a drive function, for example.
Starting the advanced setup automatically activates commissioning mode.
So that the user-defined parameter list can be used during advanced setup, it is created
and managed with the name "Setup_functions".
p
Adjustable parameters
r
Display parameters
c
Display parameters
Are read/write.
The adjustable parameter can only be parameterized in the ac‐
tive commissioning mode.
Depending on the parameter, changes are possible in the quick
setup or Safety Integrated commissioning.
The adjustable parameter can only be parameterized when the
user has the appropriate function rights.
Can only be read and cannot be edited.
Can only be read and cannot be edited.
Commissioning (web server)
10.5 Functions and menus
249
Advertisement
Table of Contents
