Siemens SINAMICS G220 Operating Instructions Manual page 460

Functions
14.9 Setpoint channel
Description of function
Unlike the extended ramp-function generator, the basic ramp-function generator does not use
rounding times.
Figure 14-72
Parameters
The following list contains the parameters of the "Basic ramp-function generator" function.
Number
p1082[0...n]
p1115
p1120[0...n]
p1121[0...n]
p1135[0...n]
458
Basic ramp-function generator in the extended setpoint channel
Name
Maximum speed
Ramp-function generator selection
Ramp-function generator ramp-up time
Ramp-function generator ramp-down time
OFF3 ramp-down time
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Unit
[rpm]
[s]
[s]
[s]
SINAMICS G220 converter