Siemens SINAMICS G220 Operating Instructions Manual page 297

Toggling between "Standard" and "Extended" has an effect within the setting areas of the
"Parameterization" function view.
Note
Call functions from the Inspector window
Functions can also be called from the individual setting or display areas in the Inspector window.
If the function is an extended function, such as encoder evaluation, the function is displayed in
the function view. The secondary navigation in the function is extended automatically.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Commissioning (Startdrive)
11.8 Extended parameterization
295