Changing The Converter Date And Time - Siemens SINAMICS G220 Operating Instructions Manual

To display configuration information for the interfaces, proceed as follows:
1. In the navigation bar, navigate to the "System" menu.
Confirm the selection using the "OK" key.
2. Select the "Settings" menu item.
Confirm the selection using the "OK" key.
3. Select the "Interfaces" menu item.
Confirm the selection using the "OK" key.
4. Select the menu item for the required interface.
Confirm the selection using the "OK" key.
– The configuration information is displayed.
– "Web server access via HTTP or HTTPS": The selection is activated/deactivated by pressing
13.5.4.3

Changing the converter date and time

Overview
You change the converter date and time in menu "System" > "Settings" > "Date and time".
Various options are available for setting the date format and for adopting the date, the time
and the time zone of the converter:
• Set manually
• Time zone
• Date
• Time
• Date format
Procedure
Figure 13-10
Proceed as follows to change the date and time:
1. In the navigation bar, navigate to the "System" menu.
Confirm the selection using the "OK" key.
2. Select the "Settings" menu item.
Confirm the selection using the "OK" key.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
the "OK" key.
Changing the date and time
Operation and monitoring with SINAMICS SDI Standard
13.5 Functions
315