I/O Presetting "Standard I/O With Analog Setpoint - Siemens SINAMICS G220 Operating Instructions Manual

14.8.1.3

I/O presetting "Standard I/O with analog setpoint"

Overview
In order to avoid having to successively change terminal by terminal, multiple terminals can be
set jointly with one operating unit.
With the I/O preset "Standard I/O with analog setpoint", the converter is prepared for
operation without fieldbus with an analog setpoint.
Requirement
The preset can only be changed using the Startdrive commissioning tool or the web server.
The converter only accepts the default setting if one of the following configurations is set for
the fieldbus telegram:
• Configurable telegram 999
• No telegram
Description
The converter receives its main setpoint via analog input AI 0 and the command to start and stop
the motor via digital input DI 0.
Figure 14-34
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
I/O preset "Standard I/O with analog setpoint"
Functions
14.8 Inputs/outputs
421