Setpoint Inversion; Direction Reversal Without Changing The Setpoint - Siemens SINAMICS G220 Operating Instructions Manual

14.9.5

Setpoint inversion

Overview
The "Invert" function changes the setpoint polarity.
Figure 14-57
Description of function
The function inverts the sign of the setpoint using a binary signal.
Figure 14-58
Parameters
The following list contains the parameters of the "Setpoint inversion" function.
Number
c1113[0...n]
14.9.6

Direction reversal without changing the setpoint

Overview
Parameters p1820 and p1821 make it possible to reverse the direction of the motor.
Requirement
The direction of the motor can be reversed when the motor is switched off.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Setpoint processing in the converter
Setpoint inversion in the extended setpoint channel
Name
Setpoint inversion
Functions
14.9 Setpoint channel
Unit
447