Table of Contents
Advertisement
Installation
5.3 Unpacking the converter
3. Remove the hole drilling template, the separately packaged accessories and the packaging
material:
4. Grasp the bottom of the converter on both sides at the center and lift the converter out of the
packaging.
For IP20 converters larger than frame size FSD1 and IP55 converters from frame size FSC and
higher, we recommend that the packaging is completely cut away and lifting equipment is
attached to the converter attachment points.
96
①
Hole drilling template
②
Accessories
③
Packaging material
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter
Advertisement
Table of Contents
