Certificates of license and license files differ as follows:
Type
Certificate of li‐
cense (eCoL)
License file
More information
Web License Manager can be found on the Internet:
Web License Manager (http://www.siemens.com/automation/license)
14.14.2
System responses to under-licensing (ramp-up)
Requirement
• A memory card is present and inserted into the converter.
Licenses for functions requiring licensing must be assigned to a memory card.
You can find more information in Chapter "Creating and downloading the license file
(Page 730)".
Description of function
Licensing is automatically checked during ramp-up of the converter.
Insufficient licensing is indicated as follows on the converter:
• F13000 License not adequate
• READY LED red light flashing at 2 Hz
14.14.3
System responses to under-licensing (operation)
Requirement
• A memory card is present and inserted into the converter.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Description
•
Provided as a PDF for each license purchased.
•
Contains the delivery note number and license number.
•
Necessary in order to create the license file in the Web License Manager.
•
It is not contained in the license file.
•
Provided as a ZIP file.
•
Contains serial number of the memory card in the file name. Cannot be trans‐
ferred to other memory cards.
•
Necessary in order to activate licenses for functions that require licensing in the
commissioning tool.
•
Contains a signature file. The converter uses the signature file to verify the
authenticity of the licenses.
14.14 Functions that require licensing
Functions
729