Siemens SINAMICS G220 Operating Instructions Manual page 610

Functions
14.11 Drive functions
Parameters
The following list contains the parameters of the "Motor holding brake" function.
Number
p0346[0...n]
c0855[0...n]
c0858[0...n]
r0899.0...13
p1215[0...n]
p1216[0...n]
p1217[0...n]
p1226[0...n]
p1227[0...n]
p1228[0...n]
p1351[0...n]
c1475[0...n]
608
Name
Motor excitation build-up time
Unconditionally release holding brake
Unconditionally close holding brake
Status word sequence control
Motor holding brake configuration
Motor holding brake opening time
Motor holding brake closing time
Threshold for zero speed detection
Zero speed detection monitoring time
Pulse cancellation delay time
Motor holding brake starting frequency
Speed controller torque setting value for motor holding brake
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Unit
[s]
[ms]
[ms]
[rpm]
[s]
[s]
[%]
SINAMICS G220 converter