Siemens SINAMICS G220 Operating Instructions Manual page 409

Table 14-56
Attrib‐
ute ID
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Instance attributes
Service 1) Type
1 get UINT32
2 get
3 get ARRAY
4 get, Struct of
get_and_clea
r
UINT32
UINT32
UINT32
UINT32
UINT32
UINT32
UINT32
UINT32
UINT32
UINT32
UINT32
Name
Interface Speed
‑ Interface Flags
Physical Address
Interface Counters
In Octets
In Ucast Packets
In NUcast Packets
In Discards
In Errors
In Unknown Protos
Out Octets
Out Ucast Packets
Out NUcast packets
Out Discards
Out Errors
Functions
14.6 Ethernet/IP communication
Value/explanation
0: link down,
10: 10 Mbps,
100: 100 Mbps
Bit 1: Link-Status
Bit 2: Duplex Mode (0: Half du‐
plex, 1 duplex)
Bit 3 ... 5: Automatic state iden‐
tification
Bit 6: Reset required
Bit 7: Local hardware fault
(0 = ok)
Ethernet MAC address
Optional, required if the "Media
Counters Attribute" is implemen‐
ted.
Received octets
Received Unicast packets
Received non-Unicast packets
Incoming packets, not processed
Incoming packets with errors
Incoming packets with unknown
protocol
Sent octets
Sent Unicast packets
Sent non-Unicast packets
Outgoing packets, not processed
Outgoing packets, with errors
407