5.5.2
Mount the lower shield plates
Requirement
To mount the lower shield plates, you will need these screwdrivers:
• T20 torx screwdriver and pozidrive or slotted screwdriver for frame sizes FSA ... FSC
• T25 torx screwdriver from frame size FSD1
Procedure
Tightening torque: 2 Nm
Figure 5-2
Tightening torque: 2 Nm
Figure 5-3
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
5.5 Shield plates for converter with IP20 degree of protection
Mounting the lower shield plates, frame size FSA
Mounting the lower shield plates, frame size FSB
Installation
101