Table of Contents
Advertisement
1.
Go to Channels and select a memory channel where to start modifications.
2.
Press the green button to open the Actions menu.
3.
Select Save to and press the green button.
4.
Select the target channel and press the green button.
>> When you save the welding parameters, the channel name changes to the program name.
5.
Modify the parameters.
6.
Save the modified parameters. See "Saving modified memory channel settings" on page 81.
Saving new welding programs
When you install new welding programs, you need to create a memory channel for each of them before use.
Proceed as follows:
1.
Install the new welding programs as instructed.
>> The welding programs automatically transfer into the memory of the welding system.
You can also transfer the welding programs through the power source USB port, if a wireless connection is unavail-
able.
© Kemppi
84
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
