Table of Contents
Advertisement
7.
Record the filler material batch number to provide traceability.
>> Read the barcode from the filler wire package. If there is no barcode available, select Enter barcode in the Task
view. Use the virtual keyboard to enter the barcode number by hand.
>> When you read or enter the barcode for the first time, Control Pad does not recognize it. Select Filler batch to
indicate that the barcode refers to the filler batch number.
8.
To select a different weld pass from the WPS, use pass selection in the Task view.
After welding
1.
When the weld is complete, select Complete weld.
This function is available only if the weld has been identified. The availability is controlled in the WeldEye cloud ser-
vice settings.
>> If heat input tracking is enabled, enter the length of the weld, which is used for heat input calculation. For more
information, see "Welding data collection: tracking heat input" on page 122.
© Kemppi
119
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
