Kemppi X8 MIG Welder Operating Manual page 133

Varying welding performance
High spatter volume
"Error codes" on the next page
© Kemppi
Check that the wire feed mechanism is adjusted properly.
Blow compressed air through the wire liner to check that it is not blocked.
Check that the wire liner is correct for the selected wire size and type.
Check the welding gun contact tip's size, type and wear.
Check that the welding gun is not overheating.
Check that the earth return clamp is properly attached to a clean surface of the workpiece.
Check the welding parameter values and welding procedure.
Check the gas type and flow.
Check the polarity of the gun/electrode.
Check that the filler wire is correct for the current application.
133
X8 MIG Welder
Operating manual - EN
1902370 / 2324