Table of Contents
Advertisement
7.
Place the gas cylinder on the cart.
8.
Fasten the straps in the cart around the gas cylinder.
2.2.3 Installing optional X8 Cooler
If your setup does not include X8 Cooler, you can skip these instructions.
X8 Cooler must be installed by authorized service personnel. Do not open the covers of X8 Power Source.
1.
Front panel
2.
Front panel latch
3.
Coolant circulation button
4.
Cooler
5.
Coolant container
6.
Connectors for the liquid cooling unit
© Kemppi
29
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
