Wired Connection - Kemppi X8 MIG Welder Operating Manual

>> Move focus to a wire feeder or a power source.
>> Press the green button.

2.5.2 Wired connection

Control Pad makes a wired connection with X8 Power Source and X8 Wire Feeder. Connect Control Pad to a wired con-
nection, when wireless connection is unavailable.
Proceed as follows:
1. To make a wired connection between Control Pad and the power source:
>> Plug the combo cable to the Control Pad connector of the power source.
>> The connector is marked with a Control Pad icon.
>> Plug the combo cable to the combo cable port on the bottom of Control Pad.
2. To make a wired connection between Control Pad and the wire feeder:
>> Plug the combo cable to the remote control connector of the wire feeder.
>> The connector is marked with a Control Pad icon.
© Kemppi
49
X8 MIG Welder
Operating manual - EN
1902370 / 2324