Table of Contents
Advertisement
Use the knobs under the display to move in the display and to adjust the values. When there is a green light in the cen-
ter of the knob, the knob also functions as a push button.
Figure: The View menu:
In the Welding view, adjust the welding power with the left knob and the fine tuning with the right knob. In most weld-
ing processes, this secondary parameter is voltage.
In all other views, move up and down in the menus with the right knob. Press the green button in the center of the knob
to open an item.
If you need to perform a reversing action, such as Cancel or Default, press the green button to accept.
Header and footer
Control Pad's header displays the serial number of the welding machine, the selected wire feeder, and the name of the
user:
There is an instruction on the footer above the knob, when the knob has a specific function. A green circle in the footer
prompts the push of the button on the control knob. The adjustable parameter or value in focus is highlighted with
orange.
© Kemppi
61
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
