Kemppi X8 MIG Welder Operating Manual page 118

4. Read the barcode or QR code on your ID card or enter the barcode manually. For more information, see Control Pad.
5. Identify the WPS to be used.
>> Select the WPS in the Task view or read the barcode on the printed document. The first pass of the WPS is selec-
ted automatically. For more information, see "Digital WPS: selecting WPS pass in WPS view" on page 108.
6. Identify the weld.
>> Read the weld's barcode from a printed work order or select the information on the display. Information about
the weld appears on Control Pad's display. During welding, the recorded welding data is linked to the weld in
WeldEye.
© Kemppi
118
X8 MIG Welder
Operating manual - EN
1902370 / 2324