Table of Contents
Advertisement
3.
Press the green button to open the menu.
4.
To change the pass selection, scroll to a pass in a list.
5.
Press the green button to select the pass and to return to the WPS View.
You can also select the WPS or pass in the Channel view. See "Digital WPS: selecting WPS or pass in channel view"
below.
Digital WPS: selecting WPS or pass in channel view
Proceed as follows:
1.
Go to Channel view.
>> Channel displays the memory channel or WPS and the pass you are currently using.
© Kemppi
109
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
