Table of Contents
Advertisement
"Digital work order: recommended WPSs" on page 127
"Digital work order: time tracking" on page 127
Digital work order: using
Digital work orders provide a simple way to achieve traceability in WeldEye and to reduce the amount of printed paper.
Normally you would have to use printed weld lists with barcodes and deliver them to each welding station.
With digital work orders, you no longer need to print weld lists on paper, as they are delivered digitally to each welding
station, where each welder can see the necessary information. Rather than reading barcodes, the welders select the weld
they are about to perform.
Digital work order: selecting work order and weld
Select the work order before welding to indicate that it is being worked on and to associate welding data with it. When
selected, the work order is marked as started in the WeldEye cloud service. The start time and the logged in welder is
recorded.
Proceed as follows:
1.
Before welding, open the Task view in Control Pad and select Work order.
2.
Select the work order from the list.
If the work order does not open, check that:
- The work order is released in WeldEye
- There are no welder or welding machine restrictions in the work order
- The device has been online for at least 15 minutes
© Kemppi
124
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
