Table of Contents
Advertisement
3.
Activate the work order or a weld.
>> If the work order contains a list of welds, scroll to the desired weld and press the green button on the right con-
trol knob to select it.
>> If the work order does not contain welds, scroll to Activate work order and press the green button on the
right control knob to select it.
4.
If the active work order or weld has predefined WPSs in WeldEye, Control Pad promps you to select one of them.
>> The work order is now selected and visible in the Task view. You can start welding.
© Kemppi
125
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
