Kemppi X8 MIG Welder Operating Manual page 52

6. Dress the sharp filler wire tip before loading to improve wire loading and to lengthen consumables' lifetime.
7. Press the Wire inch button to load the filler wire.
8. Trim the excess filler wire at a slight angle to improve ignition.
9. Check the gas flow rate.
The welding gun is now ready for use. When not using the gun, keep it in the welding gun holder on the wire feeder.
© Kemppi
52
X8 MIG Welder
Operating manual - EN
1902370 / 2324