Wire Feeder Control Panel; Wire Feeder Navigation - Kemppi X8 MIG Welder Operating Manual

Figure: The list of the additional views:
The View menu displays the following views:
1. Welding
>> Press to return to the Welding view.
2. Weld data
>> Displays information on the last welds.
3. WPS
>> For more information on WPSs, see "Digital WPS" on page 104.
4. Licenses
>> Displays the licenses installed into the welding system.
5. Error log
>> Displays the error occurred previously and its point of time. Select the error and press the green button to view
the details.
6. Date & time
>> Set the date, time and the time zone.
7. System
>> Displays information on the welding system.
8. Cloud services
>> Connect to Kemppi cloud services.

3.1.2 Wire feeder control panel

The control panel of the wire feeder has a one-knob navigation and push buttons for selecting parameters or values.
You can, for example, adjust the welding parameters and save settings on memory channels.
"Wire feeder navigation" below
"Wire feeder views" on the next page
"Wire feeder settings view" on page 72

Wire feeder navigation

The three main views on the wire feeder display are the same as in Control Pad: Channel, Welding, and Settings.
© Kemppi
70
X8 MIG Welder
Operating manual - EN
1902370 / 2324