Table of Contents
Advertisement
3.3 How to use welding system
Choosing the optimal welding program with the most suitable process and other parameters facilitates the use of X8
MIG Welder. Programs can be saved in memory channels for easy reach. Digital WPSs automatically adjust the welding
machine settings.
"Using memory channels" below
When you start using the X8 MIG Welder, select the memory channel where the correct welding program with pre-selec-
ted process and parameter values is stored and adjust the parameters.
"Using welding processes, programs and features" on page 87
Choosing a program with the optimal welding process and parameters eases the work and increases the productivity.
"Using WeldEye services" on page 104
The WeldEye cloud service consists of several independent modules. When Quality Control or Welding Production Ana-
lysis has been activated, you can use Control Pad and X8 MIG Welder to collect the welding data for the WeldEye service.
For more information on Weldeye, see www.weldeye.com.
3.3.1 Using memory channels
When you start using the X8 MIG Welder, select the memory channel where the correct welding program with pre-selec-
ted process and parameter values is stored and adjust the parameters.
For general information on memory channels, see "Control Pad views: Channel" on page 69.
To select a memory channel through Control Pad or wire feeder display, see "Selecting memory channel" below.
To create a memory channel, see "Creating new memory channel settings" on page 83.
"Selecting memory channel" below
"Saving modified memory channel settings" below
"Creating new memory channel settings" on page 83
"Saving new welding programs" on page 84
"Renaming channel" on page 85
Selecting memory channel
You can select a memory channel through Control Pad, wire feeder display or gun remote control.
Proceed as follows:
1.
To select a memory channel through Control Pad or wire feeder display:
>> Press the Channel button.
>> Scroll with the right knob to a memory channel. The selection activates immediately.
2.
To select a memory channel through the Flexlite GX MIG gun remote control, refer to userdoc.kemppi.com.
Saving modified memory channel settings
Proceed as follows:
1.
To save modified settings in Control Pad or on the wire feeder display over the current settings of a memory chan-
nel:
>> In the Welding view, press and hold the Channel button.
OR
© Kemppi
81
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
