Table of Contents
Advertisement
5.
Type
>> Select welding/brazing or cladding.
6.
Process
7.
Polarity
>> Not available for all materials.
>> Which polarity is in use. If the polarity is positive (+), connect the + side to the wire feeder.
8.
Welding program
>> After filtering, this column displays the suitable welding programs.
Control Pad views: Channel
Welding parameters are stored in the memory channels. The memory channel displays the same information of the weld-
ing parameters as the Welding view. To take a channel into use, move the focus to it. Each user has their own memory
channels.
Figure: The Channel view:
To adjust the welding parameters of the channel in focus, press the Menu or Settings button. When you adjust a para-
meter, the number of the memory channel tilts to the right to indicate a difference from the saved settings.
A WPS defines a range of values for welding parameters. If a WPS is used to create a memory channel, the parameters
are set in the middle of the range.
Control Pad views: View menu
In the Welding view, press the Menu button again to see the list of the available additional views.
© Kemppi
69
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
