How To Get Welding Programs - Kemppi AX MIG Welder Operating Manual

2.26 How to get welding programs

The use of welding programs and Wise and MAX features and processes is possible with the X5 standard and pulse
power sources (see
source (with the Wise processes specifically a Pulse+ power source is required).
Welding programs, Wise processes (WiseRoot+, WiseThin+) and MAX processes (MAX Cool, MAX Speed, MAX Position)
for each individual AX MIG Welder equipment are installed at the time of purchase according to your specific welding
requirements. This can be done by your local Kemppi dealer. Welding programs as well as the advanced welding fea-
tures can also be added later on.
For more information on the available welding program options and installing the welding programs or software
updates, contact your local Kemppi dealer or go to Kemppi.com.
The manual MIG process doesn't require additional welding programs.
For applying the welding programs installed on your AX MIG Welder equipment, refer to "Applying welding programs"
on page 133.
The list of installed welding programs on your equipment can be seen in the AX Manager's info view under Welding
software.
© Kemppi
Equipment description). WiseRoot+, WiseThin+ and MAX Position processes require a pulse power
68
AX MIG Welder
Operating manual - EN
1921900 / 2318