Table of Contents
Advertisement
Front
1.
Indicator panel
2.
Transportation handle
3.
USB connector
>> Connect a USB memory stick to upload the welding procedures (WPS) or Wise features to the power source or
update firmware if a wireless connection is unavailable.
4.
Control Pad connector
>> Connect Control Pad to the power source with a cable to charge its battery or to use it in wired mode.
5.
Front panel
6.
Front panel latch
>> Pull to open the front panel and reveal the coolant container.
7.
Coolant circulation button
>> Press to pump the coolant through the system.
Rear
1.
Transportation handle
2.
Welding current cable connectors (positive pole)
3.
Earth return cable connectors (negative pole)
© Kemppi
11
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
