Control Pad - Kemppi X8 MIG Welder Operating Manual

>> Supplies current from the power source to the wire feeder.
2. Shielding gas
>> Supplies shielding gas to the welding gun.
3. Measurement
>> Supplies the welding parameters measured during welding.
4. Control
>> Supplies data and operating voltage to the wire feeder.
5. Coolant outlet and inlet
>> Circulates coolant to and from the welding gun.
For information on the installation of the cables, see "Cables installation" on page 43.
External component connectors
1. Kemppi Gun Adapter
>> Connects to the welding gun.
The wire feeder is supplied with Kemppi Gun Adapter.
2. Subfeeder
>> Provides control to optional SuperSnake subfeeder or a motorized welding gun.
3. Remote control
>> Connects to remote control devices (Control Pad). Supplies power and data connection with 12 V voltage.
4. Voltage sensing
>> Connects to the welding piece and measures arc voltage in real time.
5. Coolant outlet
>> Delivers cold coolant to the welding gun.
6. Coolant inlet
>> Receives heated coolant from the welding gun.

1.2.3 Control Pad

This section describes the structure of Control Pad.
© Kemppi
17
X8 MIG Welder
Operating manual - EN
1902370 / 2324