Table of Contents
Advertisement
2.
Scroll through the list of WPSs and passes to move the focus to the pass you want to take into use.
>> The pass immediately activates.
After changing WPS or pass, check the pass details to make sure you are using the correct filler wire and gas.
3.
To see all the details of the selected WPS, press the Menu button twice and select WPS. To fine tune WPS para-
meters in the Welding view, press the Menu button once.
Digital WPS: selecting WPS or WPS pass through wire feeder display
You can select a WPS or change the WPS pass through the wire feeder display.
The first time you use a WPS, you must activate it with Control Pad. After the activation, you can also use the wire
feeder display or the gun remote control to select the WPS.
Digital WPS: adjusting WPS parameters
Even though the selected WPS automatically adjusts the welding parameters, you can adjust them further according to
your preferences.
You can adjust all parameters through Control Pad or the wire feeder display. Through the gun remote control, you can
adjust wire feed speed, fine tuning and dynamics.
© Kemppi
110
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
