Kemppi X8 MIG Welder Operating Manual page 15

The warning sticker inside the wire feeder:
10. Wire spool
11. Wire spool locking cover
12. Feed rolls
13. Pressure handle
14. Wire guide
15. Inside control buttons
Control panel
The control panel on the front of the wire feeder enables easy control of the wire feeder's basic features. Although Con-
trol Pad is the main control of the welding system, you can also use the wire feeder control panel or the welding gun
remote control.
The wire feeder control panel parts are:
1. Locking button
© Kemppi
15
X8 MIG Welder
Operating manual - EN
1902370 / 2324