Table of Contents
Advertisement
1.
Lock the rotating plate to its position.
2.
Adjust the length of the arm. Tighten the screws to lock to position.
3.
Turn to adjust the tension of the counterbalance spring.
4.
Turn to adjust the damping of the up and down movement.
Wire Feeder Cabinet Heater
The wire feeder cabinet heater prevents moisture from condensing inside the wire feeder cabinet so that the wire spool
stays dry.
Double Wire Feeder Rotating Plate
The double wire feeder rotating plate allows the use of two wire feeders on one power source.
X8 Cable Rack
The cable rack holds the interconnection cable during transportation or storage.
This is an alternative accessory for the gas cylinder cart. Both cannot be installed at the same time.
X8 Accessory Tray
The accessory rack holds the small parts and tools needed for welding. Install it on the side of the welding machine.
© Kemppi
57
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
