Table of Contents
Advertisement
Figure: dWPS process
For more information on WeldEye, see "Introduction to WeldEye" on page 8.
Digital WPS: activating WPS
Proceed as follows:
1.
Go to the View menu (in the Welding view, press the Menu button) and select WPS.
>> If no WPS is currently active, the following view opens:
2.
To see the list of available WPSs, press the green button. The WPS list opens.
Figure: Advanced mode / Basic mode
© Kemppi
106
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
