Table of Contents
Advertisement
Digital work order: completing
When you have completed the work defined by the work order, mark it as completed. When you do that, Control Pad
stores the end time in the WeldEye cloud service and the status of the work order changes to Completed.
If the work order contains several welds, you must mark each weld completed before you can complete the work order.
Proceed as follows:
1.
In Control Pad's Task view, select the work order and press the green button on the right control knob.
2.
Select Complete work order.
>> Control Pad marks the work order completed with a green checkmark icon.
3.
You can deselect the work order.
For more information, see "Digital work order: changing" below.
Once completed, the work order is automatically removed from the work order list in Control Pad within 15 minutes or
as soon as X8 MIG Welder is connected to Internet.
Digital work order: changing
If you deselect the active work order or change it to another work order, the welding data is no longer associated with it
and the time tracking stops.
Proceed as follows:
© Kemppi
126
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
