Digital Work Order - Kemppi X8 MIG Welder Operating Manual

After you mark the pass complete, Control Pad shows the average heat input and travel speed values and indicates
whether they are within the WPS limits. You can use this feedback to adjust the parameters or welding technique. The
device also sends the data to the WeldEye cloud service for documentation.
Control Pad displays the number of completed passes with a round green checkmark next to it.
Enable heat input tracking in the WeldEye cloud service.

Digital work order

This function is available only if the device includes WeldEye for Welding Quality Management and the function is
enabled in WeldEye settings.
Select digital work orders with Control Pad before welding. After this, all welding data is associated with the particular
work order, and it is also visible in WeldEye.
Create work orders in the WeldEye cloud service, and once released, they become automatically available to welding
machines within 15 minutes. You can restrict the visibility of the work orders to individual persons or welding machines.
For more information about the automated collection of welding data, see "Welding data collection" on page 115.
"Digital work order: using" on the next page
"Digital work order: selecting work order and weld" on the next page
"Digital work order: completing" on page 126
"Digital work order: changing" on page 126
© Kemppi
123
X8 MIG Welder
Operating manual - EN
1902370 / 2324