Table of Contents
Advertisement
the current control. The process is suitable for root pass welding in all positions, and provides a smooth and spatter-free
arc.
To adjust the welding power / wire feed speed, in the Control Pad's Welding view, turn the left knob.
To fine tune the heat while welding, in the Control Pad's Welding view, turn the right knob.
Figure: WiseRoot+ Welding view
When using WiseRoot+, depending on the welding program, you can adjust the following parameters through Settings
> Parameters:
•
Wire Feed Speed
>> min: adjusts the minimum set value for wire feed speed
>> max: adjusts the maximum set value for wire feed speed
•
Fine tuning: adjusts the heat of the arc.
•
Dynamics: -10...+10. Adjusts the short circuit behavior. On the minus side, the arc is softer. On the plus side, the arc
is harder.
•
StartPower: -30...+30. Adjusts the power level for arc ignition.
•
StartLevel: -30...+30. Fine tunes the arc length for arc ignition.
•
StopPower: -30...+30. Adjusts the power level for arc stop.
Wise processes: using WiseThin+
The WiseThin+ welding process improves the quality of sheet metal welds.
WiseThin+ is a synergic MIG/MAG process whose short-arc features are optimal for welding sheet metals (plate thickness
0.8 - 3.0 mm). It is based on precise measurement of voltage between the welding gun nozzle and the workpiece. The
measurement data serves as input for the voltage control. The process reduces heat input, deformation and spatter.
WiseThin+ is also optimal for position welding with thicker plates.
To adjust welding power / wire feed speed, in the Control Pad's Welding view, turn the left knob.
To fine tune the voltage while welding, in the Control Pad's Welding view, turn the right knob.
© Kemppi
94
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
